error help me check my codes

johnhun 2016.09.20 01:38

')' - unexpected end of program Scalping.mq4

'{' - unbalanced parentheses Scalping.mq4

return value of 'OrderSelect' should be checked Scalping.mq4

return value of 'OrderModify' should be checked Scalping.mq4

extern int MagicNumber=0;
extern double Lots =0.1;
extern double StopLoss=0;
extern double TakeProfit=25;
extern int TrailingStop=0;
extern int Slippage=3;
//+------------------------------------------------------------------+
//    expert start function
//+------------------------------------------------------------------+
int start()
{
  double MyPoint=Point;
  if(Digits==3 || Digits==5) MyPoint=Point*10;
  
  double TheStopLoss=0;
  double TheTakeProfit=0;
  if( TotalOrdersCount()==0 ) 
  {
     int result=0;
  }
  
  for(int cnt=0;cnt<OrdersTotal();cnt++)
     {
      OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);
      if(OrderType()<=OP_SELL &&   
         OrderSymbol()==Symbol() &&
         OrderMagicNumber()==MagicNumber 
         )  
        {
         if(OrderType()==OP_BUY)  
           {
            if(TrailingStop>0)  
              {                 
               if(Bid-OrderOpenPrice()>MyPoint*TrailingStop)
                 {
                  if(OrderStopLoss()<Bid-MyPoint*TrailingStop)
                    {
                     OrderModify(OrderTicket(),OrderOpenPrice(),Bid-TrailingStop*MyPoint,OrderTakeProfit(),0,Green);
                     return(0);
                    }
                 }
              }
           }
         else 
           {
            if(TrailingStop>0)  
              {                 
               if((OrderOpenPrice()-Ask)>(MyPoint*TrailingStop))
                 {
                  if((OrderStopLoss()>(Ask+MyPoint*TrailingStop)) || (OrderStopLoss()==0))
                    {
                     OrderModify(OrderTicket(),OrderOpenPrice(),Ask+MyPoint*TrailingStop,OrderTakeProfit(),0,Red);
                     return(0);
                    }
                 }
              }
           }
        }
     }
   return(0);
}

int TotalOrdersCount()
{
  int result=0;
  for(int i=0;i<OrdersTotal();i++)
  {
     OrderSelect(i,SELECT_BY_POS ,MODE_TRADES);
     if (OrderMagicNumber()==MagicNumber) result++;#property copyright "Expert Advisor Builder"
#property link      "http://sufx.core.t3-ism.net/ExpertAdvisorBuilder/"

extern int MagicNumber = 0;
extern bool SignalMail = False;
extern bool EachTickMode = {EachTickMode};
extern double Lots = {Lots};
extern int Slippage = {Slippage};
extern bool UseStopLoss = {UseStopLoss};
extern int StopLoss = {StopLoss};
extern bool UseTakeProfit = {UseTakeProfit};
extern int TakeProfit = {TakeProfit};
extern bool UseTrailingStop = {UseTrailingStop};
extern int TrailingStop = {TrailingStop};

int BarCount;
int Current;
bool TickCheck = False;
//+------------------------------------------------------------------+
//| expert initialization function                                   |
//+------------------------------------------------------------------+
int init() {
   BarCount = Bars;

   if (EachTickMode) Current = 0; else Current = 1;

   return(0);
}
//+------------------------------------------------------------------+
//| expert deinitialization function                                 |
//+------------------------------------------------------------------+
int deinit() {
   return(0);
}
//+------------------------------------------------------------------+
//| expert start function                                            |
//+------------------------------------------------------------------+
int start() {
   int Order = SIGNAL_NONE;
   int Total, Ticket;
   double StopLossLevel, TakeProfitLevel;



   if (EachTickMode && Bars != BarCount) TickCheck = False;
   Total = OrdersTotal();
   Order = SIGNAL_NONE;

   //+------------------------------------------------------------------+
   //| Variable Begin                                                   |
   //+------------------------------------------------------------------+

{Var}
{VarBuy}
{VarSell}
{VarCloseBuy}
{VarCloseSell}
   
   //+------------------------------------------------------------------+
   //| Variable End                                                     |
   //+------------------------------------------------------------------+

   //Check position
   bool IsTrade = False;

   for (int i = 0; i < Total; i ++) {
      OrderSelect(i, SELECT_BY_POS, MODE_TRADES);
      if(OrderType() <= OP_SELL &&  OrderSymbol() == Symbol()) {
         IsTrade = True;
         if(OrderType() == OP_BUY) {
            //Close

            //+------------------------------------------------------------------+
            //| Signal Begin(Exit Buy)                                           |
            //+------------------------------------------------------------------+

            {SignalCloseBuy}

            //+------------------------------------------------------------------+
            //| Signal End(Exit Buy)                                             |
            //+------------------------------------------------------------------+

            if (Order == SIGNAL_CLOSEBUY && ((EachTickMode && !TickCheck) || (!EachTickMode && (Bars != BarCount)))) {
               OrderClose(OrderTicket(), OrderLots(), Bid, Slippage, MediumSeaGreen);
               if (SignalMail) SendMail("[Signal Alert]", "[" + Symbol() + "] " + DoubleToStr(Bid, Digits) + " Close Buy");
               if (!EachTickMode) BarCount = Bars;
               IsTrade = False;
               continue;
            }
            //Trailing stop
            if(UseTrailingStop && TrailingStop > 0) {                 
               if(Bid - OrderOpenPrice() > Point * TrailingStop) {
                  if(OrderStopLoss() < Bid - Point * TrailingStop) {
                     OrderModify(OrderTicket(), OrderOpenPrice(), Bid - Point * TrailingStop, OrderTakeProfit(), 0, MediumSeaGreen);
                     if (!EachTickMode) BarCount = Bars;
                     continue;
                  }
               }
            }
         } else {
            //Close

            //+------------------------------------------------------------------+
            //| Signal Begin(Exit Sell)                                          |
            //+------------------------------------------------------------------+

            {SignalCloseSell}

            //+------------------------------------------------------------------+
            //| Signal End(Exit Sell)                                            |
            //+------------------------------------------------------------------+

            if (Order == SIGNAL_CLOSESELL && ((EachTickMode && !TickCheck) || (!EachTickMode && (Bars != BarCount)))) {
               OrderClose(OrderTicket(), OrderLots(), Ask, Slippage, DarkOrange);
               if (SignalMail) SendMail("[Signal Alert]", "[" + Symbol() + "] " + DoubleToStr(Ask, Digits) + " Close Sell");
               if (!EachTickMode) BarCount = Bars;
               IsTrade = False;
               continue;
            }
            //Trailing stop
            if(UseTrailingStop && TrailingStop > 0) {                 
               if((OrderOpenPrice() - Ask) > (Point * TrailingStop)) {
                  if((OrderStopLoss() > (Ask + Point * TrailingStop)) || (OrderStopLoss() == 0)) {
                     OrderModify(OrderTicket(), OrderOpenPrice(), Ask + Point * TrailingStop, OrderTakeProfit(), 0, DarkOrange);
                     if (!EachTickMode) BarCount = Bars;
                     continue;
                  }
               }
            }
         }
      }
   }

   //+------------------------------------------------------------------+
   //| Signal Begin(Entry)                                              |
   //+------------------------------------------------------------------+

   {SignalBuy}
   {SignalSell}

   //+------------------------------------------------------------------+
   //| Signal End                                                       |
   //+------------------------------------------------------------------+

   //Buy
   if (Order == SIGNAL_BUY && ((EachTickMode && !TickCheck) || (!EachTickMode && (Bars != BarCount)))) {
      if(!IsTrade) {
         //Check free margin
         if (AccountFreeMargin() < (1000 * Lots)) {
            Print("We have no money. Free Margin = ", AccountFreeMargin());
            return(0);
         }

         if (UseStopLoss) StopLossLevel = Ask - StopLoss * Point; else StopLossLevel = 0.0;
         if (UseTakeProfit) TakeProfitLevel = Ask + TakeProfit * Point; else TakeProfitLevel = 0.0;

         Ticket = OrderSend(Symbol(), OP_BUY, Lots, Ask, Slippage, StopLossLevel, TakeProfitLevel, "Buy(#" + MagicNumber + ")", MagicNumber, 0, DodgerBlue);
         if(Ticket > 0) {
            if (OrderSelect(Ticket, SELECT_BY_TICKET, MODE_TRADES)) {
                                Print("BUY order opened : ", OrderOpenPrice());
                if (SignalMail) SendMail("[Signal Alert]", "[" + Symbol() + "] " + DoubleToStr(Ask, Digits) + " Open Buy");
                        } else {
                                Print("Error opening BUY order : ", GetLastError());
                        }
         }
         if (EachTickMode) TickCheck = True;
         if (!EachTickMode) BarCount = Bars;
         return(0);
      }
   }

   //Sell
   if (Order == SIGNAL_SELL && ((EachTickMode && !TickCheck) || (!EachTickMode && (Bars != BarCount)))) {
      if(!IsTrade) {
         //Check free margin
         if (AccountFreeMargin() < (1000 * Lots)) {
            Print("We have no money. Free Margin = ", AccountFreeMargin());
            return(0);
         }

         if (UseStopLoss) StopLossLevel = Bid + StopLoss * Point; else StopLossLevel = 0.0;
         if (UseTakeProfit) TakeProfitLevel = Bid - TakeProfit * Point; else TakeProfitLevel = 0.0;

         Ticket = OrderSend(Symbol(), OP_SELL, Lots, Bid, Slippage, StopLossLevel, TakeProfitLevel, "Sell(#" + MagicNumber + ")", MagicNumber, 0, DeepPink);
         if(Ticket > 0) {
            if (OrderSelect(Ticket, SELECT_BY_TICKET, MODE_TRADES)) {
                                Print("SELL order opened : ", OrderOpenPrice());
                if (SignalMail) SendMail("[Signal Alert]", "[" + Symbol() + "] " + DoubleToStr(Bid, Digits) + " Open Sell");
                        } else {
                                Print("Error opening SELL order : ", GetLastError());
                        }
         }
         if (EachTickMode) TickCheck = True;
         if (!EachTickMode) BarCount = Bars;
         return(0);
      }
   }

   if (!EachTickMode) BarCount = Bars;

   return(0);
}

peter.MT4Web 2016.09.20 07:33 #1

You have broken your code by inserting or moving a piece of code to the wrong place.

Clean it up.

Keith Watford 2016.09.20 09:04 #2

You have used an EA builder to write 1 or maybe 2 EAs and tried to paste one inside another.

I doubt that you will find anyone here willing to fix code created by an EA builder.

Carl Schreiber 2016.09.20 09:30 #3

Mt4 editor mixes sometime the closing ) and }. I would use Notepad++ and count opening and closing brackets...

Fernando Carreiro 2016.09.20 09:35 #4

gooly:
Mt4 editor mixes sometime the closing ) and }. I would use Notepad++ and count opening and closing brackets...

Gooly! This is not the case. Have another look at the code posted. The OP has pasted a full EA right smack in middle of another (see subsection below).

{
     OrderSelect(i,SELECT_BY_POS ,MODE_TRADES);
     if (OrderMagicNumber()==MagicNumber) result++;#property copyright "Expert Advisor Builder"
#property link      "http://sufx.core.t3-ism.net/ExpertAdvisorBuilder/"

extern int MagicNumber = 0;

William Roeder 2016.09.20 11:23 #5

We hate EA builder
You couldn't be bothered to learn mql4, therefor there is no common language for us to communicate.
There are only two choices: learn to code it, or pay someone. We're not going to code it FOR you. We are willing to HELP you when you post your attempt (using SRC) and the nature of your problem, but we are not going to debug your hundreds lines of code.
EA builder makes bad code counting up while closing multiple orders.
EA builder makes bad code Bars is unreliable (max bars on chart) volume is unreliable (miss ticks) Always use time
EA builder makes bad code Not adjusting for 4/5 digit brokers
EA builder makes bad code not adjusting for ECN brokers.
EA builder makes bad code not checking return codes.
EATree uses objects on chart to save values - not persistent storage (files or GV+Flush.) No recovery (crash/reboot.)

Help mql4 CROSSOVER MA it works How do I add

New comment