Indicator Shift

New comment
 
Why does the following INDICATOR CODE draw only a horizontal line on the main CHART window.
If I change the price registers CODE (O,H,L,C)for example e.g.
From Low[7] to Low[pos+7] it draws a graph, However it shifts the indicator forward approx 16 bars

Regards
Peterg


int start()
{
int counted_bars=IndicatorCounted();
//----
//---- check for possible errors
if (counted_bars<0) return(-1);
//---- last counted bar will be recounted
if (counted_bars>0) counted_bars--;
int pos=Bars-counted_bars;


//---- main calculation loop
//pos = 200;
while(pos>=0)
{
double dHigh;
double dLow7, dLow9, dLow13, dLow25 ,dClose16 ;
double dResult, dClose20, dCalc, dFallBack ;
//dWhatEver = 1;
dFallBack = 4.00003 + ((Close[16] * 10000) - 13000) ;
dLow7 = ((Low[7]*10000)-13000);
dLow9 = ((Low[9] * 10000) - 13000);
dLow13 = ((Low[13] * 10000) - 13000);
dLow25 = ((Low[25] *10000) - 13000);


dClose20 = ((Close[20] * 10000) - 13000);

dCalc = dFallBack;

if(dLow7 > dCalc)
{if(dLow25 > dCalc)
{if(dLow9 > dCalc)
{if(dLow13 > dCalc)
{if(dClose20 > dCalc)
{ dCalc = dCalc + 5.00022;
}else {}
}else {}
}else {}
}else {}
}else {}


dResult = ((dCalc + 13000) / 10000);
//dResult = dResult + 1.310;
//Comment("Number1 = ", DoubleToStr(dClose,4));
//Comment("Number2 = ", DoubleToStr(dLow,4));
Comment("Number3 = ", DoubleToStr(dResult,4));
ExtMapBuffer1[pos]= dResult ;
pos--;
}

//----
return(0);
}
 
Please, use button to insert MQL-code.
 
use print to outpu dResult to log windows, check it values.

I guess ExtMapBuffer1[] 's valuse not proper, for example if values betweent 1. 310000000 1 to 1.3100001.

note: in one window, all values draw base on same axes, so should in a proper ranges! 
 
I wished to tell to you, that correctly formatted code will read through to much more people, and probability of that you receive advice, will be more. To take offence in the financial market senselessly.

int start()
{
int counted_bars=IndicatorCounted();
//----
//---- check for possible errors
if (counted_bars<0) return(-1);
//---- last counted bar will be recounted
if (counted_bars>0) counted_bars--;
int pos=Bars-counted_bars;
 
 
//---- main calculation loop
//pos = 200;
while(pos>=0)
{
double dHigh;
double dLow7, dLow9, dLow13, dLow25 ,dClose16 ;
double dResult, dClose20, dCalc, dFallBack ;
//dWhatEver = 1;
dFallBack = 4.00003 + ((Close[16] * 10000) - 13000) ;
dLow7 = ((Low[7]*10000)-13000);
dLow9 = ((Low[9] * 10000) - 13000);
dLow13 = ((Low[13] * 10000) - 13000);
dLow25 = ((Low[25] *10000) - 13000);
 
 
dClose20 = ((Close[20] * 10000) - 13000);
 
dCalc = dFallBack;
 
if(dLow7 > dCalc)
{if(dLow25 > dCalc)
{if(dLow9 > dCalc)
{if(dLow13 > dCalc)
{if(dClose20 > dCalc)
{ dCalc = dCalc + 5.00022;
}else {}
}else {}
}else {}
}else {}
}else {}
 
 
dResult = ((dCalc + 13000) / 10000);
//dResult = dResult + 1.310;
//Comment("Number1 = ", DoubleToStr(dClose,4));
//Comment("Number2 = ", DoubleToStr(dLow,4));
Comment("Number3 = ", DoubleToStr(dResult,4));
ExtMapBuffer1[pos]= dResult ;
pos--;
}
 
//----
return(0);
}
 
This code in other words:

int start()
{
int counted_bars=IndicatorCounted();
//----
//---- check for possible errors
if (counted_bars<0) return(-1);
//---- last counted bar will be recounted
if (counted_bars>0) counted_bars--;
int pos=Bars-counted_bars;
 
 
//---- main calculation loop
//pos = 200;
while(pos>=0)
{
double dHigh;
double dLow7, dLow9, dLow13, dLow25 ,dClose16 ;
double dResult, dClose20, dCalc, dFallBack,Support=1.30 ;
//dWhatEver = 1;
dFallBack = Close[16] -Support+4*Point ;
dLow7 = Low[7]-Support;
dLow9 = Low[9]-Support;
dLow13 = Low[13]-Support;
dLow25 = Low[25]-Support;
 
 
dClose20 = Close[20]-Support;
 
dCalc = dFallBack;
 
if(dLow7 > dCalc && dLow25 >dCalc && dLow9 > dCalc && dLow13 > dCalc && dClose20 > dCalc) dResult = dCalc + 5*Point + Support; else dCalc + Support;
 
Comment("Number3 = ", DoubleToStr(dResult,4));
ExtMapBuffer1[pos]= dResult ;
pos--;
}
 
//----
return(0);
}
 
I don't understand logics of this indicator and cannot to help to you.
 
DxdCn:
use print to outpu dResult to log windows, check it values.

I guess ExtMapBuffer1[] 's valuse not proper, for example if values betweent 1. 310000000 1 to 1.3100001.

note: in one window, all values draw base on same axes, so should in a proper ranges!

Thank you for your reply
will check my code on your advise
Regards
peter_zyn
New comment
Reason: